tDynamo Installation for POSExpress terminals

This installation setup is for PC-terminals running POSExpress; CPS Air installs use Bluetooth only.

 

WARNING: Do NOT use the stand's cable!

Equipment Setup

1. Unbox charging stand. It comes with a white colored data/power USB cable.

2. Unbox the tDynamo device. It comes with a black charging cable which we recommend using instead of the built in white cable on the stand.

3. Remove the plug from the rear of the device.

4. Seat the tDynamo device into the charging stand firmly.

5. Use the included round key to turn the locking screw on the back of the stand to lock the device in place.

Note: Remove the key and set it aside for future use, such as for cleaning or servicing the device.

6. Make sure the device is firmly locked into the stand.

7. While the white cable from the stand may be used, it is recommended to use the black 90 degree USB-C cable provided with the device. Plug the black cable into the USB-C port on the tDynamo then plug the USB into an open port on the PC.